The task of trenchless sewer repair is one that can be easily and quickly done by any professional with knowledge in the plumbing industry. This is also a project that can be finished by a home repair do-it-yourself home owner. If you are someone that would rather complete the repairs necessary on your own, there are few simple tips and tricks to follow to ensure it is done properly and with few damages.
If you are going to do the work yourself, first and foremost you have to check and see what the local building codes and laws are. The sewer system is one that falls under the jurisdiction of the code enforcement office. Contact them and make certain that you are going to be able to do the small fix without making major changes to outdated fixtures.
Before you get started on the main job of actually fixing the damage, you want to check the surrounding area for any blockages or other obstructions. In most cases you are not going to encounter anything hidden in the pipes. However, you do not want to be halfway through a job only to find a wire that you were not expecting.
Next, you are going to want to find out how big the leak actually is. You can tell in most instances based off of the amount of water you find in your lawn. If an abundance of water pools up in a very short time frame, chances are you are going to need more than just a simple trenchless sewer repair. You are most likely going to want an entire replacement of piping and you have to be prepared for that.
One of the most common reasons that sewer lines get damaged is because of intruding tree roots.
These lively and strong branches can get to your fixtures and poke holes into the piping. Before starting on any project, make sure you do not have any tree roots that are in the way. You do not necessarily have to cut down the tree, but you can cut away the tree roots that are causing the issues.
Make certain that there are no drains or clogs in your sewer lines. If there are blockages, it can make it difficult to discover where the problem is and how much of a fix is going to be necessary. Use drain cleaner and septic tank cleaner in advance of getting to work on your damaged piping.
Two holes are going to be required on either side of the damaged pipe. Locate the problem and dig both holes before you start working. This will allow you to feed through any of the trenchless sewer repair materials that are required to repair the leak.
Finally, it is recommended that you line your sewer piping to protect it from further damages. While you are already working on a repair, you have the access you need to complete this project at the same time.
If the area that you are working on is one that is going to be extremely difficult to access, if you are unaware of where the actual problem is occurring, or if you do not have the time or ability to complete trenchless sewer repair on your own, it recommended that you call in an expert to make sure the problem gets taken care of the right way.